The Tube Form Solutions Blog

2 Tips for Preventing Tube Bending Machine Problems

Posted by Mike Thomas

From tube collapse to tooling marks, tube bending machine problems can happen even with the best tube bending machinery. Like many problems, an ounce of prevention is worth more than a pound of cure which is why the most important step in any bending operation is preparation. So, here are two tips for preventing tube bending machine problems.

Tooling

tooling_dies-1.jpg

Before you attempt a bend, your tooling needs to be set properly. The first step in troubleshooting any tube bending machine problem is double checking that the tooling you are using is correctly positioned. When using a mandrel for bending, incorrect mandrel placement can lead to humps in the bend, tube collapse, and many other common problems. On the other hand, a mandrel can also help solve some of the most common tube bending issues. The key, however, is always to ensure that your tooling, whatever it is, is set correctly. Taking the time to double check tooling placement is well worth it if it prevents a problem that could make a tube or pipe unusable.  

It is also important to make sure you are using the correct tooling altogether. For instance, if your bending application requires that the finished product be free from tooling marks or other visible flaws then the best tooling to use might be no mar tooling. While no mar tooling isn’t ideal for many bending operations (it tends to have a shorter lifespan so increases material costs) for applications where aesthetics are essential, then no mar tooling can make a big difference. So, while you could accomplish the same bend with traditional metal tooling, the application might warrant the extra cost of specialty tooling.

The Right Formula

Another important step when preparing for a bend is formula calculation. When you take the time to calculate things like the section area moment of inertia of the shape and size tubing you’ll be bending you can save yourself a lot of time and effort. Taking the time to work through all of the formulas you will need for a bend will help you set your machine correctly and avoid many of the common tube bending machine problems before they happen.

Need help with bending formulas? We have a Section Modulus Calculator and Tube Bending Formulas Guide that can help!

Learn More

Click here or follow the link below to download a free introduction to tube bending to learn more, troubleshoot bending problems, or contact us at any time with any questions or comments you may have.

Introduction to Tube Bending

 

This post was published on August 22, 2017 and updated on August 22, 2017.

Topics: Tube Bending

Request More Information
New Call-to-action

Subscribe to Email Updates

Recent Posts